Custom Stainless Steel Front License Plates
Put your business logo, shop name or social handle on a laser-etched stainless steel front plate. Upload your logo, see it on the plate instantly, and order online. Every plate is cut and etched in our shop in Melbourne, Florida.
What You Get:
A 12" × 6" front license plate laser cut from 16 gauge (0.060") stainless steel, your logo and lettering laser-etched, rounded corners and 4 standard mounting slots. Popular with welders, fabricators, contractors, small businesses and car clubs.
SEE SAMPLES AT THE BOTTOM OF THE PAGE!
Frequently Asked Questions
-
Most plates are $69–$119, depending on the design. Order 2 or more and save 50%!
-
16 gauge 304 stainless steel. It won’t rust and holds up to sun and salt air. The plate may get dirty over time.
-
Yes. Upload any logo and the builder shows it etched on the plate before you order.
-
Yes, nationwide for free, or pick up at our shop in Melbourne, FL.
-
Decorative front plates are allowed in states that don’t require a front plate. Check your state’s rules.
-
Item descriptionWash it with mild car-wash soap or dish soap and water, using a soft cloth or sponge. Rinse it, then dry it with a microfiber towel so water spots don’t form. For fingerprints or road film, a little glass cleaner or stainless steel cleaner on a soft cloth works well. Going through a car wash is fine.
Don’t use steel wool, scouring pads, rubbing compound, bleach, or acid-based cleaners like some wheel cleaners. They can scratch the stainless, leave rust spots, or wear away the etched design over time.
That last warning is the important one. Your etching marks the surface of the steel rather than cutting deep into it, so something abrasive or a harsh acid cleaner can fade it.